|
Products and Pricing
The following products are available from Vertical Power and our dealers (highlighted below list).
|
|
VP-X |
 |
 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Item |
|
Price |
|
Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VP-X Sport
|
|
$1,200 |
|
Includes VP-X Sport system and mounting brackets. Either a wiring harness kit or connector-only kit (below) is required with the VP-X system.
|
|
 |
|
|
|
|
|
|
|
VP-X Pro
|
|
$1,800 |
|
Includes VP-X Pro system and mounting brackets. Either a wiring harness kit or connector-only kit (below) is required with the VP-X system.
|
|
|
|
|
|
|
|
|
|
VP-X Sport
Wiring Harness Kit
|
|
$370 |
|
Includes about 550 feet of Tefzel wiring, connectors, gold plated terminal pins, 5-conductor trim wire, backshell for connectors, shielded data wire, diodes, rubber boot, and assorted insulated crimp terminals. Wiring harness has power connector terminals crimped on wires. Click here to see a list of contents.
|
|
|
|
|
|
|
|
|
|
VP-X Pro
Wiring Harness Kit |
|
$400 |
|
Includes about 600 feet of Tefzel wiring, connectors, gold plated terminal pins, 5-conductor trim wire, backshell for connectors, shielded data wire, diodes, rubber boot, and assorted insulated crimp terminals. Wiring harness has power connector terminals crimped on wires. Click here to see a list of contents. |
|
|
|
|
|
|
|
|
|
VP-X Sport
Connector-Only Kit
|
|
$140 |
|
Includes connectors and terminals for power connectors. Crimp tool (shown in Tools section below) is required. Click here to see a list of contents. |
|
|
|
|
|
|
|
|
|
VP-X Pro
Connector-Only Kit
|
|
$150 |
|
Includes connectors and terminals for power connectors. Crimp tool (shown in Tools section below) is required. Click here to see a list of contents.
|
|
|
|
|
|
|
|
|
|
VP-X Mounting Tray
|
|
$120 |
|
The mounting tray allows you to permanently mount the base of the tray to the aircraft, then simply install the VP-X itself using two hand-tightened screws. Net weight is 5 oz. Click here to see images. |
|
|
|
|
|
|
|
|
|
|
VP-200 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Item |
|
Price |
|
Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VP-200
|
|
No longer available |
|
Includes one Display Unit, Control Unit, Switch Panel, remote-control key fob, USB flash memory, and interconnect cables. Requires data inputs from external GPS and engine monitor.
|
|
|
|
|
|
|
|
|
|
VP-200 Duo
|
|
No longer available |
|
Includes one Display Unit, one Switch Panel, two Control Units, one remote-control key fob, USB flash memory, and interconnect cables. Requires data inputs from external GPS and engine monitor.
|
|
|
|
|
|
|
|
|
|
|
VP-400 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Item |
|
Price |
|
Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VP-400 Coming Soon!
|
|
TBD |
|
This new product will replace the VP-200.
Details in Q1 2012.
|
|
|
|
|
|
|
|
|
|
VP-400 Duo Coming Soon!
|
|
TBD
|
|
This new product will replace the VP-200 Duo.
Details in Q1 2012. |
|
|
|
|
|
|
|
|
|
|
Tools
Note: You do not need a crimp tool if you're ordering the wiring harness kit, which has the terminals already crimped on the wire. Crimp tools are only needed for the connector-only kits. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Item |
|
Price |
|
Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Production grade power connector crimp tool rental
|
|
$10/month and $300 deposit |
|
Rent the special crimp tool required for power connectors. Do not use pliers or standard crimp tools with these pins. You will be charged $300 when the tool is shipped, and refunded that amount less $10 per month you kept the tool when it is returned in good condition. Note: you may receive a new or used tool. |
|
|
|
|
|
|
|
|
|
Shop-grade power connector crimp tool |
|
$50 |
|
There are differences between the production and shop grade tools. The production tool has a better mechanism for holding the terminals and aligning the wire before you crimp it. It also crimps down straight whereas the other tool crimps at a slight angle. The shop-grade tool requires you to take a bit more care when aligning the wire and the terminal before and during crimping. But if you do that right, both tools give you a good solid crimp. We always recommend using the right crimp tool to match the specific connector you are working with. Each connector has a specific crimp tool it is designed to work with. |
|
|
|
Dealers
Products are available directly from Vertical Power and as part of a complete panel from the following dealers:
|
|
|
|
Our products are for experimental aircraft and Light Sport Aircraft only, and should not be purchased for use in FAA-certified aircraft.
UK and Europe Sales
UK and Europe Sales (VP-X only)
Mendelssohn Pilot Supplies
GPS Europe Ltd
49-51 Colinton Road
Edinburgh
EH10 5DH U.K.
ph. +44 131 447 7777
www.gps.co.uk
Australia and New Zealand Sales (VP-X sales only)
AERO ASSIST
Jake Jansen
Seaview Downs SA 5049, Australia
+61 412 624 723
jakejansen@aeroassist.com.au
Mendelssohn Pilot Supplies
PO Box 1038
Windsor
Vic. 3181
Australia
ph. +61 395 373848
www.ozpilot.com.au
Click on the link below to sign up for the Vertical Power newsletter. |
|
Click here and read past newsletters in our Archive library.
|
|
